Complete the training of five-axis gantry application for customers, and our company has the ability to produce, debug and train customers for five-axis gantry production.

15 sets of four-axis vertical machining centers of our company were delivered to an aviation industry company.

The previous batch of drilling and tapping centers was successfully delivered to the die casting plant to help customers extend their product lines.

BBT40 not only touches the taper, but also the plane at the bottom of the taper, that is, the double-sided contact accuracy is better and the rigidity is higher. Generally, spindles above 12000RPM and below 18000RPM are in the form of BBT, while BT40 is only taper contact, which is less rigid in comparison.

When tapping a Mitsubishi system, the F feed value is the input of the corresponding pitch. For example, the thread hole of M12, the pitch is 1.75, the bottom hole is 10.25, assuming that the rotation speed S is set to 200RPM, then the F value needs to be given at this time is the value of the pitch, that is, F=1.75, when the Mitsubishi system reads G84, it will automatically convert the F feed value.

The vertical machining center is equipped with CNC numerical control system, tool magazine and automatic tool changer device, which can realize the processing of multiple processes such as milling, boring, drilling, reaming and tapping in the case of one clamping, and can realize its processing capacity

The programmable functions of CNC machine tools are divided into two categories: one is used to realize tool trajectory control, that is, the movement of each feed axis, such as line/arc interpolation, feed control, coordinate system origin offset and transformation, dimension unit setting, tool offset and compensation, etc., this type of function is called preparation function

Fan failure, due to inadequate maintenance, oil stains on the back cover of the spindle motor, resulting in fan damage, this fan is 3-phase 220V AC voltage, but there is no fan stop alarm signal. Often the spindle runs at high speed and the load is too large, and the motor overheats to protect the alarm.